Linear Technology provides LinearView 3.0 to its customers and potential customers for use as reference material.  

If you are unable to find the materials that you require, please visit our website at http://www.linear.com.

IMPORTANT MACINTOSH CONFIGURATION NOTE: If your computer is set up to use TCP/IP networking with a dedicated connection (such as a local area network), LinearView 3.0 will work without further configuration.  Otherwise, you must create a LinearView 3.0 TCP/IP local configuration to provide the internal TCP/IP connection your web browser uses to read the LinearView 3.0 screens.  Read the "How To Configure TCP/IP" document included in the same folder as this document for more information.

LinearView 3.0 is not generally compatible with proxy servers.  If your web browser is set to use a proxy server, you should set it to make direct connections instead, or set it to manual  proxy configuration and exclude addresses starting  with "127.0.0.1" and "localhost".

Network installation (Windows NT, 95, 3.11 & Mac):
 If you would like to make LinearView 3.0 available over your company network, 
   1) Copy the contents of the CD to a shared directory
   2) Have network users permanently mount that shared directory
   3) Then have the user install LinearView 3.0; selecting
      the Typical / CDROM install.

Linear Technology Utility programs (Windows NT, 95, 3.11):
 In some circumstances the utility programs (SCAD, MSCAD and SPICE) may not function fully if launched from within LinearView 3.0. In that  case, to access these applications go to the program folder where you  installed LinearView 3.0 and launch the utilities from there, or use the Start menu.
